GRICH Dual Shower Head with Hand Held Spray: 2 in 1 High Pressure Handheld Shower Head & Rainfall Shower Head, 9 Spray Modes/Settings Detachable Shower Head with Hose, cUPC Certification Approved

Q1:How can you remove the restrictor?

A:The restrictor is earned in a separate package, and you can easily install and remove it. When you look at the water inlet, there will be a black filter. If you need it put the restrictor under the black strainer, if not remove it

Q2:Is switching the use of shower heads easy enough to do it during your shower?

A:Yes, you only need to insert the shower into the shower head can be, it is the shower and the shower head can be the same time out of the water, if you just shower out of the water, just pull it out

Q3:Is this shower head made of l?

A:NO, it is made of heat-proof material, if it is l then the shower will be very hot, not conducive to holding by hand; at the same time the l is not fallen, easy to deformation.But its installation with the water pipe is l, easy to reinforce and not easy to damage

Q4:How many setting types of handheld shower head?

A:There are 9 ways to use the shower alone; you can also use the handheld shower alone; you can also use the shower head and the handheld shower at the same time, because there are 9 ways to use the shower head, so there are also 9 ways to use it together, there are 19 ways in total

Q5:Can the rain shower head and the handheld shower be used at the same time?

A:Yes, you can follow the step: step 1:Find the black knob below the rainfall shower head. step2: Rotate the knob, from 1° to 89° will position is the mixed water mode from rainfall shower head and handheld shower head, in this position you can adjust the water pressure for both. And switch slowly to find the point where the same water pressure for both shower heads. step3The point of the 0°/90°: Only Handheld/ Only Rainfall

Attention

1. the water pipe connection is made of l, easy to reinforce and will not be damaged when you tighten it;

2. The back of the cage is to adjust the size of the water pressure, note that when it 0 ° is only the shower head spraying water, 90 ° is the heldhead shower spraying water; in 1-89 ° can adjust the water pressure of both, choose the water pressure you like

3.59 inches of l hose, unlike plastic hose as knotted, and with 360 ° rotating bolt, when you use the convenient rotation of the shower head

Installation of the shower

Step 1:Remove the old shower headRemove the old shower head, remove the old Teflon tape, and remove any gaskets inside the shower head with tweezers or a screwdriver

Step 2:Wrap the Teflon tape around the threads of the shower arm, only 3-5 turns on the threads of the shower arm

Step 3: Install the fixed shower head screw the fixed shower head clockwise onto the shower arm

Step 4: Connect the hose to the fixed shower head. Screw the hex nut of the hose clockwise into the black plastic thread of the fixed shower head. (Note: Check to see if there is a washer inside the hose hex nut, if not, place a spare washer.)

Step 5: Attach the hose to the shower handle screw the tapered nut of the hose clockwise into the handheld shower

Step 6: Once installed, place the hand shower in the fixed shower head